Wyse X90e User Manual
5
5. To remove the existing flash module, depending on the type of module you have, you
must either pull up the module in the direction as shown in Figure 7, or remove the two
screws as shown in Figure 8. Rock the module carefully until free of the connector.
screws as shown in Figure 8. Rock the module carefully until free of the connector.
Warning
Flash and RAM modules may be susceptible to damage by Electro-Static
Discharge (ESD). All industry-standard cautions should be followed to avoid
ESD. Before you remove or install a modules, touch any metal part of the
chassis and keep that contact with the chassis during the installation
process.
Discharge (ESD). All industry-standard cautions should be followed to avoid
ESD. Before you remove or install a modules, touch any metal part of the
chassis and keep that contact with the chassis during the installation
process.
Figure 7 Removing an older-type flash module
Figure 8 Removing screws from newer-type flash module
6. Install the new flash module in the reverse order of removing the old module.