Whirlpool W10298600A - SP User Manual

Keep your washer as clean and fresh as your clothes.  

To keep washer interior odor-free, follow this recommended 

monthly cleaning procedure:
1.  Make sure the washer is empty.
2.  Using recommended AFFRESH

®

 washer cleaner,  

add one tablet to washer drum

  OR
  If using liquid chlorine bleach, add 1 cup (250 mL) to 

liquid chlorine bleach dispenser.

IMPORTANT: Do not add detergent to CLEAN 

WASHER with AFFRESH

™

 cycle. Do not use more than 

recommended amount of bleach to avoid damaging 

product over time.
3.  Close washer lid.
4.  Press POWER.
5.  Select CLEAN WASHER with AFFRESH

™

 cycle.  

6.  Press START/PAUSE. Water will pour into washer  

for a moment and pause, lid will lock, then cycle  

will continue.

NOTE: For best results, do not interrupt cycle. If cycle must 

be interrupted, press START/PAUSE twice and run a RINSE 

AND SPIN cycle to ensure cleaner or bleach have been 

rinsed from washer.

To clean exterior:
1.  Use a soft, damp cloth or sponge to wipe up any spills.
2.  Use all-purpose surface cleaner, if needed. 
IMPORTANT: To avoid damaging the washer’s finish,  

do not use abrasive products.

Replace inlet hoses after 5 years of use to reduce the risk 

of hose failure. Periodically inspect and replace inlet hoses 

if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of 

replacement on the label with a permanent marker.

The Touch Screen should be cleaned periodically to 

remove fingerprints or dust. 
1.  Make sure the washer is OFF.
2.  Wipe the touch screen area with soft, damp cloth. 
3.  Wipe dry with clean, soft towel.
IMPORTANT: To avoid damaging the touch screen window,    

do not use chemicals or abrasive products.

You may find laundry product residue leftover in your 

dispensers. To remove residue, wipe with a damp cloth and 

towel dry. Do not attempt to remove the dispensers or trim for 

cleaning. The dispensers and trim are not removable.