Whirlpool W10175588A User Manual

Your new front-loading high efficiency washer, was designed to 
conserve resources and lower your water and energy bills. The 
washer is designed to determine and then provide the amount of 
water needed for the best performance. The time of operation 
may be greater for this new system than for a conventional 
washer.

Flexible electronic controls are easy to use whether you are a 
beginner or an expert.

Adjusting to the size of the load, this feature allows the washer to 
use the minimal amount of water needed to clean and rinse the 
clothes. With a low water level, you can obtain the same results 
with smaller amounts of laundry products. Because only the 
required amount of water is used, the washer saves energy, too. 

To reduce washer “walk” and “off-balance” conditions, your new 
washer combines:

■

2 Springs to isolate vibration

■

2 Shock absorbers at the washer base to minimize 
movement

The stainless steel drum eliminates corrosion and enables higher 
spin speeds for more water extraction, reducing drying time.

The motor adapts to the load size and to the cycle selected to 
give the optimum cleaning, rinsing, and spinning conditions. The 
motor can handle slow speeds needed for delicate items and is 
powerful enough to drive an average clothes load up to high-
speed spin.

This washer automatically selects the spin speed based on the 
cycle selected. 

A precision balancing system allows the washer to reach high-
speed spins. The washer spins faster so that clothes coming out 
of the washer will have less moisture than with traditional top 
load machines. In addition, if the Dynamic Balance system 
detects off-balance loads during spinning, it redistributes the 
clothes so that they are evenly balanced.

The three compartments in the dispenser allow loading of all 
laundry products before the washer is started. The products will 
be dispensed into the wash at the optimal time for high-
performance cleaning. The bleach release system is included in 
the detergent advantage system. The detergent is added at the 
beginning of the cycle, and the bleach is added after the 
enzymes have had a chance to do their cleaning. The fabric 
softener is dispensed in the rinse cycle  or in the EXTRA RINSE, if 
selected. The Detergent Advantage System Dispenser tray is 
easily removed for cleaning.