Whirlpool W10113000A User Manual

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water
inlet hoses:

NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.

Parts supplied:

Tools needed for securing the drain hose and leveling
the washer:

Alternate Parts

Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the “Assistance or Service” section.

■

Pliers that open to 1

⁹⁄₁₆"

(3.95 cm)

■

Flashlight (optional)

A. Drain hose form
B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)
D. Beaded tie strap

■

Adjustable or open end
wrench

⁹⁄₁₆" (14 mm)

■

Level

■

Wood block

■

Ruler or measuring tape

If You Have:

You Will Need to Buy:

Laundry tub or
standpipe taller
than 96" (2.4 m)

Sump pump system (if not already
available)

1" (2.5 cm)
diameter standpipe

2" (5 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter,
Part Number 3363920 and connector kit
Part Number 285835

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)

Floor drain

Siphon break, Part Number 285834;
additional drain hose,
Part Number 8318155 and connector kit,
Part Number 285835

Water faucets
beyond reach of fill
hoses

2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008

Lint clogged drain

Drain protector, Part Number 367031