Whirlpool LAB0050PQ User Manual

Gather the required tools and parts before starting installation. 
The parts supplied are in the washer basket.

■

Pliers that open to 1

⁹⁄₁₆" (3.95 cm) 

■

Flashlight (optional)

■

Adjustable or open end wrenches, 10 mm and 14 mm

■

Level

■

Wood block

■

Utility knife

■

Measuring tape

■

T-20 TORX

®†

  screwdriver

■

Phillips screwdriver

Your installation may require additional parts. For ordering 
information, please refer to the “Assistance or Service” section of 
this manual.  

You may order a pedestal separately for this washer. This 
pedestal will add about 12" (30.48 cm) to the height of your 
washer for a total height of approximately 45" (114.3 cm).  

To order, call the dealer from whom you purchased your washer 
or refer to the “Assistance or Service” section of this manual. Ask 
for Model Number LAB0050PQ.

Are you planning to stack your washer and dryer? To do so you 
will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your washer 
or refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8182452.

†®TORX is a registered trademark of Textron Innovations Inc.

A

B

C

D

E

Laundry tub or 
standpipe taller 
than 72" (183 cm)

Sump pump system (if not already 
available)

1" (2.5 cm) 
diameter 
standpipe

2" (5 cm) diameter to 1" (2.5 cm) 
diameter standpipe adapter, 
Part Number 3363920

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall 
drain tub or utility sink, sump pump and 
connectors (available from local 
plumbing suppliers)

Lint clogged drain

Drain protector, Part Number 367031

Water faucets 
beyond reach of 
fill hoses

2 longer water fill hoses: 
6 ft (1.8 m) Part Number 76314, 
10 ft (3.0 m) Part Number 350008

Must also order:

British to universal hose adapter, 
Part Number 3357451

Installing new 
water inlet hoses

British to universal hose adapter, 
Part Number 3357451