Whirlpool Duet W10254043C User Manual

This washer channels 100% of the water through the dispensers 
to assure thorough rinse-out and mixture of all the laundry 
products before they touch any garments. The water is then 
sprayed from the top front onto the center of the load, providing 
even distribution and optimum cleaning performance. It is normal 
for small amounts of water to remain in the dispensers when the 
wash cycle is complete.

This washer has a specially designed valve that closes during the 
wash portion of the cycle so that 100% of the water and detergent 
mixture is used on the load. The Efficient Detergent System 
ensures that no water or detergent is wasted.

Shock absorbers, 2 springs and electronic controls are specially 
designed to help redistribute the load automatically and minimize 
movement of the wash drum during the spin cycle. The 6-Point 
Suspension System reduces the amount of force transmitted to 
the floor by the washer, resulting in reduced noise, and vibration.

NOTE: The panel shown above may be different from that of your model.

WARNING: To reduce the risk of fire, electric shock, or injury to 
persons, read the IMPORTANT SAFETY INSTRUCTIONS before 
operating this appliance.
The following is a guide to using your washer. Please refer to 
specific sections of this manual for more detailed information.
Do not store laundry products on the top surface of this washer. 
Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of 
detergent will be marked “HE” or “High Efficiency.” This wash 
system, along with less water, will create too much sudsing with a 
regular non-HE detergent. Using regular detergent will likely result 
in washer errors, longer cycle times, and reduced rinsing 
performance. It may also result in component failures and 
noticeable mold or mildew. HE detergents are made to produce 
the right amount of suds for the best performance. Follow the 
manufacturer's instructions to determine the amount of detergent 
to use. Remember, concentrated detergents such as 2x or higher 
will use less detergent based on load size. 

Before washing clothes for the first time, if not completed during 
the final installation step, choose the Normal/Casual cycle and run 
it without clothes. Use only HE High Efficiency detergent. Use 

1

/

2

 

the manufacturer’s recommended amount for a medium-size 
load. This initial cycle serves to ensure the interior is clean before 
washing clothes. 

1. Open the washer door by pulling on the handle. Sort laundry 

according to color and type of fabric. Place a load of sorted 
clothes in the washer. Do not overload washer. Overloading 
can cause poor cleaning. 

■

The washer can be fully loaded, but not tightly packed. 
Washer door should close easily.

■

Mix large and small items and avoid washing single items. 
Load evenly.