Westinghouse L1928NV User Manual

Source

Resolution & Frequency 

All the function settings for the LCD monitor are controlled via the control keys located on 
the bottom part of the front panel. To display the OSD main menu, press the “Menu” 
keypad button on the control keys. (Note: The OSD menu display will disappear 
automatically after approximately 10 seconds, if no action is taken.)     

The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to 
the monitor settings can be made using the OSD menu.   

•  Press the “Menu”    button to display the OSD. 

•  Press the ▲ or ▼ button to select the function to be adjusted. 

•  Press the 
 button to access the function to be adjusted. 

•  Press the ▲ or ▼ button to select the sub-function to be adjusted. 

•  Press the  or 
 buttons to change the current setting of the sub-function. 

•  To go back to the previous menu, press the    button. Changes are saved 

automatically.

•  To exit the OSD menu press "Menu"    again. It automatically will save any changes 

that have been made. 

NOTES:
•  The OSD turns off several seconds after you stop pressing the buttons while 

performing an adjustment. 

•  Any changes are automatically saved in memory when the OSD turns off. Turning off 

the power should be avoided while using the menu. 

•  Adjustments for clock, phase, and positions are saved for each individual signal timing. 

Except for these adjustments, all other adjustments have only one setting, which 
applies to all signal timings. 

•  The icon color will change from blue to white when a function is selected. 

The following is a list of the OSD sub-menus for the LCD monitor: 

Audio Menu

Misc Menu

Image Menu

Info Menu

Color Temp. Menu

11