Wegener Communications IPUMP 562 User Manual
www.wegener.com
800092-01 Rev. A
25
Unity 552 User’s Manual
Setup Audio
Use following steps to display
Audio Setup
screen on the OSD menu:
1. Navigate to the
Unit Setup
screen, see
2. Press the down arrow button to select
Audio Setup
.
3. View the details as shown in
Figure 3.14: iPump 562 OSD Audio Setup
Use the
Audio Setup
screen to set and display the audio output options.
Table 3.8: Audio Output Options
Composite Out
NTSC_M, NTSC_J, PAL/50 or
PAL/60
PAL/60
Selects video output format
Component Out
480i, 480p, 576i, 576p, 720p or
1080i
1080i
Selects video output format. When a DVI/HDMI device
is connected, the mode shall be automatically set to
Slave.
is connected, the mode shall be automatically set to
Slave.
Component V-Refresh
50 or 60 or 59.94
Configures the video/vertical refresh rate
HDMI Out
-
Displays current display mode of the DVI/HDMI device
after EDID negotiation.
after EDID negotiation.
Option
Possible values
Comments
Option
Possible values
Comments
Audio Port
1 or 2
Audio Language
A01 or ***
Audio Routing
Stereo or Left/Right on both
May be used for two languages
Audio Attenuation
0 through 20
S/PDIF Mode
Passthru, Linear PCM or Off