Manualsbrain.com
  1. Manuals
  2. Brands
  3. Wegener Communications
  4. IPUMP 562
  5. User Manual

Wegener Communications IPUMP 562 User Manual

Download
Page of 68
Operation
26 
 800092-01 Rev. A 
www.wegener.com
Set LAN-based Decode options
Use following steps to display 
Decoder Source
 screen on the OSD menu:
1. Navigate to the 
Decoder Setup
 screen
2. Press the up or down arrow buttons to select 
Decoder Source
.
3. Press 
Enter
. 
4. Press the up or down arrow buttons to select either 
LAN-Multicast
 or 
LAN-Unicast
. 
5. Press 
Enter
.
6. Select 
Activate Settings
.
7. Press 
Enter
.
 Figure 3.15:   iPump 562 OSD Decoder Source
Use the 
Decoder Source
 screen to set and display the LAN Decode options. 
Table 3.9: LAN Decode Options
Set LAN IP Networking options
Use following steps to display 
LAN IP Setup
 screen on the OSD menu:
1. Navigate to the 
Unit Setup 
screen, see 
2. Press the down arrow button to select 
LAN IP Setup
.
3. View the details as shown in 
Option
Possible values
IP-Address 
Multicast or Unicast IP Address
IP-Port Number
The corresponding IP Port number
Audio Routing
Stereo or Left/Right on both
Audio Attenuation
0 through 20
S/PDIF Mode
Passthru, Linear PCM or Off