Wegener Communications IPUMP 562 User Manual
48
800092-01 Rev. A
www.wegener.com
Apx 1.2 Diagterm Individual Commands
The diagterm individual commands are not grouped together under common groups. These
commands perform functions such as setting audio attenuation or turning on LNB power.
commands perform functions such as setting audio attenuation or turning on LNB power.
groups
Report List of Groups
Group Name: rdbs
Command
Synopsis
report
Report RBDS Status
test
Send test message to RBDS port "test <port> <message>
Group Name: lan
Command
Synopsis
ip
Set Static LAN IP Address of the Unit
gateway
Set Network Gateway for LAN Interface
mode
Set LAN Addressing Mode (DHCP, STATIC,WEG)
setup
Set IP Address and Subnet mask for the LAN port
subnet
Set static LAN subnet mask
Group Name: output
Command
Synopsis
aspect
Set output aspect ratio of the display device 4x3;16x9;14x9
cc
Set closed captioning mode [tv|cc1|cc2|cc3|cc4|dtv]
scaling
Set output display scaling mode [letterbox|panscan]
Group Name: sigma
Command
Synopsis
ver
Print version information
Group Name: http
Command
Synopsis
proxy
Set the proxy server for http
Group Name: snmp
Command
Synopsis
community
Set SNMPV2 Community Access String