Sprint Nextel Digital Voice DVP 403 User Manual

Chapter 3:

Chapter 3:

Chapter 3:

Chapter 3:     Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running    

 

Issue 1.6

Issue 1.6

Issue 1.6

Issue 1.6    

Getting the Voice Mail System Up and Running 

Getting the Voice Mail System Up and Running 

Getting the Voice Mail System Up and Running 

Getting the Voice Mail System Up and Running –

–

–

– ◆

◆

◆

◆ –

–

–

–    11

11

11

11 

 

    

STEP 5

STEP 5

STEP 5

STEP 5

    

    

1.  Plug one end of a modular line cord into Voice Mail Port 1 on 

Sprint Digital Voice.  See Figure 4. 

2.  Connect the other end into the RJ11 modular jack that is 

connected to an analog port on the phone system (Note: on the 
3x8 and CTX systems, this will be an Analog Adapter. On the MTX 
and LTX, the analog port may be from an analog station card or 
Analog Adapter.) 

3.  Repeat steps 1 and 2 for voice mail ports 2, 3 and 4 (if ports 3 and 

4 are installed). 

4.  Verify that all cabling and connections are correct. Plug in the AC 

adapter connector to the voice mail, and then plug the AC adapter 
into an electrical outlet. 

 
Note: If using a phone system other than Protégé, refer to the Release 

Note: If using a phone system other than Protégé, refer to the Release 

Note: If using a phone system other than Protégé, refer to the Release 

Note: If using a phone system other than Protégé, refer to the Release 
Notes for Software Versions and the Integration Guide for further 

Notes for Software Versions and the Integration Guide for further 

Notes for Software Versions and the Integration Guide for further 

Notes for Software Versions and the Integration Guide for further 
options.

options.

options.

options.    
 

IMPORTANT NOTE

IMPORTANT NOTE

IMPORTANT NOTE

IMPORTANT NOTE    

Extensions will receive notification of new messages (flashing 

Extensions will receive notification of new messages (flashing 

Extensions will receive notification of new messages (flashing 

Extensions will receive notification of new messages (flashing 
Intercom LEDs) only

Intercom LEDs) only

Intercom LEDs) only

Intercom LEDs) only when voice mail port 2 is connected to the phone 

 when voice mail port 2 is connected to the phone 

 when voice mail port 2 is connected to the phone 

 when voice mail port 2 is connected to the phone 

system. This is the factory default and can be modified if required.  

system. This is the factory default and can be modified if required.  

system. This is the factory default and can be modified if required.  

system. This is the factory default and can be modified if required.  
For further information refer to STEP 8 of this guide.

For further information refer to STEP 8 of this guide.

For further information refer to STEP 8 of this guide.

For further information refer to STEP 8 of this guide.