Siemens NO NAME HE2425 User Manual

Getting Started

English 11

Do not place food directly on oven bottom. Do not use aluminum foil or protective 
liners to line any part of an appliance, especially surface unit drip bowls or oven 
bottom. Installation of these liners may result in a risk of electric shock or fire.

The oven vent is located below the display above the rear left cooktop element. It 
is normal to see steam escaping from the vent and condensation may collect on 
the backguard and cooktop. This area may become hot when the oven is in use. 
Do not block the vent as it is important for air circulation.

The oven will automatically shut off after 12 hours (24 hours if the time format is 
set for 24 hour in the Select Function section).

The oven features a self-cleaning function that eliminates the manual labor 
involved with cleaning your oven. 

Beep - Signals that more information must be entered or confirms the receipt of 
an entry. A Beep also signals the end of a program or an oven error.

End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive 
beeps will sound.

Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.

Flashing Symbol or Number - Signals an incomplete setting and calls for 
another step or START to be pressed.

F Number Codes -These codes display when there is a problem with the range.

The convection fan operates during any convection mode. When the oven is oper-
ating in the convection mode, the fan will turn off automatically when the door is 
opened. The convection fan does run during self-clean, although not at the begin-
ning of the mode.

Note: The convection fan also runs during preheat for the bake mode.