Siemens NO NAME HE2425 User Manual

Operation - Oven

English 22

Note: The probe temperature can only be set when the probe is installed in the 
oven.

3. Press COOKING MODE and select BAKE, CONVECTION BAKE or CON-

VECTION  ROAST. 

4. Press START. The default oven temperature will appear.
5. Turn knob to change oven temperature if necessary.
6. Touch START.
7. Turn knob to set the probe temperature (desired end temperature of the food).
8. Press START.

The chosen oven temperature is displayed in the upper right hand corner of the 
display.

The probe temperature is displayed in the center to the left of the cooking mode. It 
starts at 80 degrees and  increases in 5°F increments until the chosen probe  tem-
perature is reached.

The oven is preheated when the beep signals once.

When the set probe temperature is reached, END appears in display and oven 
turns off.

1. Touch TEMPERATURE. Oven temp will flash in the display. 
2. Turn the knob to desired temperature and press START twice.

1. Touch TEMPERATURE. The oven temperature will flash. 
2. Press start and PROBE TEMP will flash.
3. Turn the knob to desired temperature and press START again.

Note:   Always remove probe from oven when cooking is complete.  The probe 
symbol will remain in the display until the probe is removed. Do not leave probe 
attachment in oven during self-clean. Oven will not self-clean with the probe 
installed in the oven