SCI Scandicrafts A2840/R User Manual
4
The unit can be operated using either the wireless remote or the front control panel.
1. On the rear of the purifier, switch the master power to the “on” position (the front display
will light up).
2. Press the
ON/OFF button on the front of purifier to power on the unit. The fan will start.
3. Press the
Fan▲ and Fan▼ buttons to adjust the airflow speed to your desired level.
4. Press the
Purify▲ and Purify▼ buttons to set the purifier setting from Stage 1 through
Stage 5 to accommodate your desired level.
5. Press the
Sterilize button to operate the UVC and Photo Catalyst sanitize feature.
Press the
Sterilize button again to stop its operation. The UVC bulb will produce a
light blue glow on the inside of the unit when this feature is on.
Note: Do not look
directly at the UVC Bulb while it is operating.
6. Press the
Anion button to turn on the negative ion generator. Press the Anion button
again to stop the negative ion generator function.
Sleep Button
Press the
Sleep button to use the screen saving mode. This will turn most of the
display lights off. Press any button on the front panel to deactivate the sleep mode.
The working mode of
The working mode of
Anion, Purify, Sterilize, and Fan Speed will not change while in
sleep mode. If the timer function is set to turn the power off at a set time, do not use
the sleep function. The timer will only deactivate the sleep mode instead of shutting
down the unit if the sleep mode is on.
the sleep function. The timer will only deactivate the sleep mode instead of shutting
down the unit if the sleep mode is on.
Time/Set Button
Read these instructions thoroughly before setting the time.
*** After 8-10 seconds of inactivity, the clock will be set or you will have to start the process again. ***
The clock is a 24-hour clock; 13:00 would be 1:00 p.m.
To set the current time:
1. Press the
Time/Set button twice. “Time” will blink on the display.
2. The
Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons
adjust the minutes.
To set the power off timer:
1. While the unit is operating, press the
Time/Set button once. “Time/Set” will blink on
the display.
2. The
Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons
adjust the minutes.
GENERAL OPERATION
OFF
ON
Power Switch Time Fan Speed Operating Display Operating Buttons
Sterilizer Feature Purifier Feature (5 Stages) Anion Feature
Remote
I-4506 BR7580R-1 6/25/07 7:57 AM Page 10