Perle Systems Iolan Sds4 Hl Device Server 4030370 User Manual
134
Serial Port Profiles
Configure the following parameters:
Connect to remote
system
When enabled, the IOLAN initiates communication to the TruePort client.
Default: Enabled
Default: Enabled
Host Name
The configured host that the IOLAN will connect to (must be running
TruePort).
Default: None
Default: None
TCP Port
The TCP Port that the IOLAN will use to communicate through to the TruePort
client.
Default: 10001 for serial port 1, then increments by one for each serial port
Default: 10001 for serial port 1, then increments by one for each serial port
Connect to
Multiple Hosts
When enabled, the IOLAN will establish a connection to multiple clients
(Hosts). When using the multiple hosts feature, all TruePort clients must be
running in Lite mode.
Default: Disabled
Default: Disabled
Send Name on
Connect
When enabled, the port name will be sent to the host upon session initiation
.
This
will be done before any other data is sent or received to/from the host.
Default: Disabled
Default: Disabled
Define Additional
Hosts Button
Click this button to define the hosts that this serial port will connect to. This
button is also used to define the Primary/Backup host functionality.
for more information.
Listen for
Connection
Connection
When enabled, the IOLAN will wait for connections to be initiated by the
TruePort Client.
Default: Disabled
TruePort Client.
Default: Disabled
TCP Port
The TCP Port that the IOLAN will use to communicate through to the TruePort
client.
Default: 10001 for serial port 1, then increments by one for each serial port
Default: 10001 for serial port 1, then increments by one for each serial port