Citrix Systems Network Router NETSCALER 9.3 User Manual
w
show snmp trap
Example
add snmp trap specific 10.102.29.3 -version V2 -
add snmp trap specific 10.102.29.3 -version V2 -
destPort 80 -communityName com1 -severity Major
Done
> show snmp trap
Type DestinationIP DestinationPort
Version SourceIP Min-Severity
Community
---- ------------- ---------------
------- -------- ------------
---------
generic 10.102.29.9 162
V2 NetScaler IP N/A public
specific 10.102.29.9 162
V2 NetScaler IP - public
specific 10.102.29.3 80
V2 NetScaler IP Major com1
Done
Parameters for configuring SNMP traps
trapClass
The trap type. Possible values: generic and specific.
version
SNMP version of the trap PDU to be sent.
trapDestination
IPv4 address of the trap listener.
destPort
Destination port of the trap. Default: 162. Minimum value: 1
scrIP
Source IP of the traps.
severity
Specify the severity level of trap messages. All generated trap messages of the
severity level up to the specified severity level will be sent to the trap listener.
severity level up to the specified severity level will be sent to the trap listener.
Possible values: Critical, Major, Minor, Warning, and Informational.
Default: Informational.
communityName
The community string. Default: public.
To configure SNMP Traps by using the configuration utility
1. In the navigation pane, expand System, expand SNMP, and then click Traps.
Chapter 2
SNMP
52