Citrix Systems Network Router NETSCALER 9.3 User Manual

2. In the details pane, do one of the following:

• To create a new trap, click Add.

• To modify an existing trap, select the trap, and then click Open.

3. In the Create SNMP Trap Destination or Configure SNMP Trap dialog box, set the

following parameters:

• Type*—trapClass

• Version—version

• Destination IP Address*—trapDestination

• Destination Port—destPort

• Source IP Address—srcIP

• Minimum Severity—severity

• Community Name—communityName

*A required parameter

4. Click Create or OK, and then click Close.

A message appears in the status bar, stating that the trap has been configured
successfully.

By default, the NetScaler appliance logs any SNMP trap messages (for SNMP alarms in
which logging is enabled) when at least one trap listener is specified on the NetScaler
appliance. However, you can specify that SNMP trap messages be logged even when no
trap listeners are configured.

At a NetScaler command prompt, type:

w

set snmp option -snmpTrapLogging ( ENABLED | DISABLED )

w

Example
> set snmp option -snmpset ENABLED

 Done

> show snmp option

        Snmpset:  DISABLED      SnmpTrapLogging:  

ENABLED

 Done

>

Citrix NetScaler Administration Guide

53