Citrix Systems Network Router NETSCALER 9.3 User Manual
the SNMP manager to its IP address. You can add up to a maximum of five host-name
based SNMP managers.
based SNMP managers.
If you do not configure at least one SNMP manager, the NetScaler appliance accepts
and responds to SNMP queries from all IP addresses on the network. If you configure
one or more SNMP managers, the appliance accepts and responds only to SNMP queries
from those specific IP addresses.
and responds to SNMP queries from all IP addresses on the network. If you configure
one or more SNMP managers, the appliance accepts and responds only to SNMP queries
from those specific IP addresses.
If you remove an SNMP manager from the NetScaler configuration, that manager can no
longer query the NetScaler.
longer query the NetScaler.
To add an SNMP manager by using the NetScaler command
line
At the NetScaler command prompt, type the following commands to set the parameters
and verify the configuration:
and verify the configuration:
w
add snmp manager <IPAddress> ... [-netmask <netmask>]
w
show snmp manager
Example
> add snmp manager 10.102.29.10
> add snmp manager 10.102.29.10
Done
> show snmp manager
1) 10.102.29.5 255.255.255.255
Done
To add an SNMP manager by specifying its IP address,
using the NetScaler command line
At the NetScaler command prompt, type the following commands to set the parameters
and verify the configuration:
and verify the configuration:
w
add snmp manager <IPAddress> ... [-netmask <netmask>]
w
show snmp manager
Example
> add snmp manager 10.102.29.10
> add snmp manager 10.102.29.10
Done
> show snmp manager
1) 10.102.29.5 255.255.255.0
Done
> add snmp manager 10.102.29.15 10.102.29.30
Done
> show snmp manager
1) IP Address: 10.102.29.10
Netmask: 255.255.255.255
2) IP Address: 10.102.29.15
Netmask: 255.255.255.255
3) IP Address: 10.102.29.30
Citrix NetScaler Administration Guide
55