Autostart CT-5060 User Manual

 

CT-5060 User Guide 

P. 6 

This safety feature lets you unlock only the driver’s door when you press the 

 

button on the transmitter, and then 

 the rest of the vehicle doors if the 

 

button is pressed for a second time within 3 seconds. 

To temporarily disable the siren’s chirp confirmations upon arming and disarming (e.g. in 

a quiet neighbourhood): 
1.  Press the 

 button.  

2.  Within 3 seconds, press the 

 or 

 button to arm or disarm without any 

chirps. 

: Your installer can program the Chirps Disabled feature if you want the chirps to be 

permanently disabled. 

The system was designed with flexibility and OEM integration in mind. With its 

programmable options, this unit can single-handedly control nearly any electrical system 

in your vehicle. 

: The programming of your system should be left to a professional. Changing any one of 

the settings may affect the operation of your system. 

The user-selectable options are as follows: 

Safe Start 

Safety feature: Safe Start features will prevent accidental remote starts. 

If this feature is enabled, the user must press the 

 button 2 times within 3 

seconds to remote-start the vehicle. 

If Swap Start Mode has been configured by your installer, to remote-start your vehicle 

press 

 and 

 simultaneously. (Press 

 to trigger the 

 output.) 

Safe Start features will eliminate accidental remote starts, e.g. when there are children 
playing with the transmitter. 

Remote Door Locks 

If your system was installed with the Remote Door Locks option, you will have the 

convenience of remote keyless entry. 

 your doors and 

 the system: 

1.  Press and hold the 

 button for approx. 1 sec. 

2.  The parking lights will flash twice and the LED will go out to confirm that the doors 

have been unlocked, that the Starter Kill feature is disarmed (if it was installed) and 

that the Alarm is disabled. 

 your doors and 

 the system: 

1.  Press and hold the 

 button for approx. 1 sec. 

2.  The parking lights will flash once and the LED will flash slowly to confirm that the 

doors have been locked, that the Starter Kill feature is enabled (if it was installed) 

and that the Alarm is armed.