Autostart CT-5060 User Manual

 

CT-5060 User Guide 

P. 4 

The system can be placed in Valet Mode to disable the remote starting capabilities. If the 

vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the 
engine from being remote-started accidentally. 
To put the system into Valet Mode: 
1.  Turn the key to the 

 position. 

2.  Within 3 sec. press the Valet button and release it. The LED will come 

. (The 

system is in Valet Mode.) 

To take the system out of Valet Mode: 
1.  Turn the key to the 

 position. 

2.  Within 3 sec. press and release the Valet button. The LED will go 

. (The system 

is out of Valet Mode.) 

The Valet button can only be used if the ignition key is in the 

 position. 

The system can be placed in Valet Mode to disable the remote starting capabilities. If the 
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine 

from being accidentally started by remote control. 
To ENTER Valet Mode 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds. 

2.  The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  The 

LED will turn

solid. 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 5 times within 10 seconds. 

2.  The Parking Light will flash twice indicating the Module is now out of Valet Mode.  

The LED will turn 

. 

This feature will put your vehicle into Valet Mode using the remote transmitter instead of 

the Valet button as above. 

Note:  Once the Electronic Valet is activated, the remote starter and Alarm features are 
disabled. 

To put the system into Valet Mode: 
1.  Hold down the 

 and 

 buttons simultaneously for 3 seconds. 

2.  The Parking Lights will flash 3 times. 

The siren will chirp twice and the LED will come 

. 

To take the system out of Valet Mode: 
1.  Hold down the 

 and 

 buttons simultaneously for 3 seconds. 

2.  The Parking Lights will flash 2 times. 

The siren will chirp twice, then pause, then chirp twice again, and the LED will go 

. 

Safety feature: Activate Panic Mode in an emergency situation.