Liebert Air Flow Enhander XDA User Manual

• Phillips screwdriver
• Pliers
• Scissors

1. Determine the desired mount-

ing position on the door.

2. Attach the mounting bracket to 

the top of the XDA, positioning 
the bracket to obtain the 
desired mounting height.

3. Position the hanging support of 

the bracket toward the rear of 
the unit, with the tabs of the 
bracket down and in front of the mounting angles.

4. From the rear of the unit, place screws through the XDA mounting 

angles, then through the bracket.

5. Place nuts on the screws and tighten them. The nuts should be 

visible from the front of the unit.