Liebert Air Flow Enhander XDA User Manual

1. Lift the unit with bracket attached and hang it on the door, as 

shown at right. Ensure that the bracket rests safely on top of the 
top edge of door.

2. Move the unit sideways into the desired position. Ensure that the 

unit does not interfere with operation of the door latch.

3. Place screws through the middle and lower mounting holes of the 

XDA mounting angle and then through the door. Place nuts on the 
screws and tighten them.

4. Remove the nuts that attach the bracket to the unit and remove 

the bracket.

5. Lean the top of the unit slightly away from the door and remove 

the screws.

6. Install screws in the top holes in the same manner as in the mid-

dle and bottom holes. Tighten all nuts and screws.