Thermador PH30HS Owner's Manual

English 7

Note:
Turn off the lights and fan. Allow the lights to cool before 
handling. If new lights do not operate, be sure lights are 
inserted correctly before calling for service.

Halogen Light Replacement 
(some models)

•

Using a flat edge from a screwdriver or equivalent tool, 
pry loose the lens cover as shown in Figure 4.

•

Remove the damaged light and replace with a new 
12 Volt, 20 Watt (maximum) halogen light made for a 
G-4 base. Some hoods use 120 V, 40 W (maximum) 
bulbs with G-9 base. Follow package directions and do 
not touch new light with bare hands.

•

Reinstall the light and cover.

Heat Lamp Replacement (some models)

•

Turn heat lamp counterclockwise to remove. 

•

Replace lamp with either a PAR-38 175W heat lamp or 
a PAR-40 250W heat lamp. 

The PAR-38 175W heat lamp provides a tighter seal within 
the enclosure and produces the same amount of effective 
heat with lower energy consumption. These lamps may not 
be readily available at local retail outlets. The PAR-40 
250W heat lamp is more widely available. It can be used 
instead. 

PAR-38 175W heat lamps can be purchased through the 
following retailers: 

•

OpTech Inc: 800-848-6624 or 
www.optechlightbulbs.com

•

bulbs.com: 888-455-2800 or www.bulbs.com