Vinotemp VT34TS Owner's Manual

 
 

1.  Your wine cooler is equipped with an AUTOMATIC control panel lock 

function. This function will prevent any unwanted changes to your 
temperature or power settings.  

2.  The lock function will activate automatically 12 seconds after the 

last time a button is pushed on the control panel.  

3.  To unlock the control panel, press and hold the down arrow button 

and up arrow button for three seconds, then the control panel will 
beep and blink, indicating the control panel is active and the 
settings can be changed.  

 
Important:  In order to operate efficiently, this product should be in an 
environment with an ambient temperature of less than 110°F. 
 
 

•  Always unplug the wine cellar before cleaning.  

•  Do not use benzene, scrubbing brushes or chemical cleaners as these 

will damage the unit.  

•  Use only a mild, nonabrasive cleanser to clean the exterior of the 

cabinet.  

•  Clean the stainless steel door and handle by wiping with a warm water 

and baking soda solution. The solution should be about 2 tablespoons 
of baking soda to a quart of water.  

•  Wash the racks with a mild detergent solution. 

•  Always dry all parts with a clean dry cloth before plugging the wine 

cellar back into the receptacle. 

•  Always unplug the wine cellar before moving. 

•  Always remove all bottles before moving the wine cellar. 

•  Securely tape down all loose items (shelves) inside your appliance. 

•  Tape the door shut. 

•  Be careful of cabinet legs to avoid damage when moving. 

•  Be sure the wine cellar stays in the upright position during 

transportation. 

•  Protect the outside of appliance with a blanket or similar item when 

moving as needed. 

9 

1 7 6 2 1   S o u t h   S u s a n a   R o a d ,   R a n c h o   D o m i n g u e z ,   C a l i f o r n i a   9 0 2 2 1  

i n f o @ v i n o t e m p . c o m