Thermador PH54GS Installation Instruction

English 2

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT: Save these Instructions for the Local Gas 
Inspector’s use.

INSTALLER: Please leave these Instructions with this unit 
for the owner.

OWNER: Please retain these instructions for future 
reference.

If the information in this manual is not followed 
exactly, fire or shock may result causing property 
damage or personal injury.

Do not repair or replace any part of the appliance 
unless specifically recommended in the 
manuals. Improper installation, service or 
maintenance can cause injury or property 
damage or void product warranty. Refer to this 
manual for guidance. All other servicing should 
be done by a qualified technician.

The unit is heavy and should be handled 
accordingly. Proper safety equipment such as 
gloves and adequate manpower of at least two 
people must be used in moving the hood to avoid 
injury and to avoid damage to the unit or the 
floor. Rings, watches, and any other loose items 
that may damage the unit or otherwise might 
become entangled with the unit should be 
removed. 

Hidden surfaces may have sharp edges. Use 
caution when reaching behind or under 
appliance.

This appliance complies with one or more of the following 
Standards:

•

UL 858, Standard for the Safety of Household Electric 
Ranges

•

UL 923, Standard for the Safety of Microwave Cooking 
Appliances

•

UL 507, Standard for the Safety of Electrical Fans

•

ANSI Z21.1- American National Standard for 
Household Cooking Gas Appliances

•

CAN/CSA-C22.2 No. 113, Fans and Ventilators

•

CAN/CSA-C22.2 No. 61, Household Cooking Ranges

It is the responsibility of the owner and installer to 
determine if additional requirements and/or standards 
apply to specific installations. Always refer to local codes to 
ensure all requirements are met. 

Turn off power circuit at service panel and lock 
out panel before wiring this appliance. 
Requirement: 120 VAC, 60 Hz 20 A. Allow the 
appliance to cool after the power has been 
turned off before servicing the appliance.

To reduce the risk of fire use only metal 
ductwork.

If required by the National Electrical Code (or Canadian 
Electrical Code), this appliance must be installed on a 
separate branch circuit.

Installer — show the owner the location of the circuit 
breaker or fuse. Mark it for easy reference.

Remove all tape and packaging before using the 
appliance. After unpacking the appliance, please 
recycle the packaging material as all 

THERMADOR

® 

appliance packaging is 

recyclable. Never allow children to play with 
packaging material.

Never modify or alter the construction of the appliance. For 
example, do not remove panels or wire covers.