Thermador PH54GS Installation Instruction
English 4
Installation
NOTE: Do not throw away any packaging until appliance is fully installed.
Parts Included
(1) Metal Transition with backdraft
damper
damper
(2, 3, or 4 depending on model and size)
Stainless steel baffle filters
Stainless steel baffle filters
(2) Side panels
(1) Grease tray
(1) Remote blower adaptor
(2) 175W Heat lamps (on some models)
Halogen bulbs, installed
(1) Wooden bracket used for Hood
Mounting Bracket (part of install- do not
throw away)
Mounting Bracket (part of install- do not
throw away)
(1) Fastener assortment
Use & Care Manual, Installation Instructions, and
Registration Card
Registration Card
Parts Not Included
Aluminum tape (DO NOT use duct tape)
1/2” (13mm) Conduit (if required, follow local codes)
Strain Relief
Blower
Optional duct cover accessory is available for separate
purchase. Refer to www.thermador.com for more details.
purchase. Refer to www.thermador.com for more details.
Optional Keep Hot Shelf accessory is available for
separate purchase. Refer to www.thermador.com for
more details.
separate purchase. Refer to www.thermador.com for
more details.
Optional Backsplash accessory is available for separate
purchase. Refer to www.thermador.com for more details.
purchase. Refer to www.thermador.com for more details.
Tools Required
Flat head and phillips
screwdrivers
screwdrivers
Wire stripper
Drill
3/16” (4.76mm) drill bit
3/8” (9.52mm) nut driver or
socket and ratchet
socket and ratchet
Protective work gloves
Considerations Before Installing Hood