Marvel ML24BNS1RB Owner's Manual

19

The unit is shipped with the (2) shelves taped in place in 

the upper and the lower shelf positions. Remove them from 

the refrigerator and arrange them as follows when setting 

up your unit.

If you are not serving beer on tap, your keg dispenser can 

be used as a refrigerator by placing both shelves on the 

mounting brackets as shown in Figure 23. The shelves are 

marked upper and lower, The upper shelf should be placed 

in the top shelf position and the shelf marked lower should 

be placed in the bottom shelf position.

Stored upper and 

lower shelves

on side

Two shelves 

installed

Figure 22

If you are using a quarter barrel of beer, you can add shelf 

space for keeping your mugs chilled. The quarter barrel 

must set on the floor, it cannot fit on the shelf, see 

Figure 24. Be sure the white floor plate is in the bottom of 

the interior compartment before positioning the barrel.

Figure 24

Half barrel (keg)

Installed upper 

shelf above 

barrel

Figure 23

Quarter barrel

Figure 25

If you are using a half barrel (keg) or (2) 1/6 barrels, place 

the two shelves on the right side of the keg dispenser on 

the two mounting hooks for storage. (See Figure 25). Be 

sure the white floor plate is in the bottom of the interior 

compartment before positioning the barrel(s).

Two shelves

White floor plate

White floor plate

Stored lower shelf

If you are using the appliance as a refrigerator for per-

ishable foods, the set-point temperature should be set 

between 34°F and 42° F (1.2° C and 5.7° C).