Whirlpool XHPC155YBD Installation Instruction

Partially install two of the #12 x 3/4"  

hex-head sheet metal screws in the 

indicated holes. Leave a space of  

about 3/8" (10 mm) between the  

screw head and the bottom of  

the washer.
note: If your washer has leveling feet installed, remove them. 

To avoid floor damage and ease installation and handling, 

unfold the empty pedestal box flat and place it next to the 

washer. Position the drawer divider so that it will be near the 

top of the washer, as shown. Gently tip the washer on its side 

so the washer is resting on the drawer divider.

Move the pedestal against the washer bottom. The front of  

the pedestal cabinet should align with the washer cabinet  

as shown below. 
Slide the pedestal’s keyhole slots over the lower two partially 

installed screws.