GE CVM1750SHSS Installation Instruction

NOTE: The exhaust adaptor with damper is not 

needed for recirculating models. You may want  

to save them for possible future use. 

  Carefully pull out the blower unit. The wires  

will extend far enough to allow you to adjust  

the blower unit.

  Roll the blower unit 90° so that fan blade openings 

are facing toward the front of the oven. 

Roll

  Slide the blower plate from under its retaining 

flange and lift it off. Remove and save screw that 

holds the blower motor to oven.

  Remove and save screws that hold blower plate  

to the oven.

NOTE: Make sure wires remain routed in the grooves  

of the motor frame.

Back of 

Oven

 Blower Plate Screws

Blower Plate

Blower 

Motor Screw

Retaining 

Flange