Dacor DYWS4 Manual

Care and Cleaning

Cleaning the Control Panel

The display and touch panel may be wiped with a

damp clean cloth, as needed. Do not use chemicals

or any abrasive materials. Be careful not to use

sharp objects that may damage the surface of the

touch panel or displays.

Exterior Stainless Steel Surfaces

CAUTION

Always wipe stainless steel (silver colored) surfaces with

the grain.

Clean stainless steel surfaces with a mild solution

of detergent and warm water. Rinse and dry with a

soft, lint-free cloth. You may also use Dacor Stain-

less Steel Cleaner. Use it according to the directions

on the package.

Changing/Replacing the Clean-

Pour Head Gasket

The Clean-pour head is designed to provide ease of

use and cost effective replacement when damaged.

To replace the head gasket:

1. Locate the threaded nut on the bottom of the

head assembly.

2. Un-thread the gasket nut by turning it in a coun-

ter clockwise direction. If it is difficult to turn,

you may use needle-nose pliers. Be careful not

to damage the plastic threads.

3. Remove the gasket nut.
4. Remove gasket from stem.

5. Select the gasket color to be used (green, red or

white).

6. After placing the gasket onto the stem, carefully

thread the nut back onto the stem by turning

clockwise. It should thread easily. IMPORTANT:

Do not force. Make sure the nut is secure.

Gasket

nut