Dacor DYWS4 Manual

22

Care and Cleaning

Gas Leak Test

If you suspect your wine dispensing system has 

a leak, you can run a gas leak test to make sure 

before calling for service.

To test for gas leaks:

1.  Open the door on the front of the unit. Then 

swing the spout cover to the up position. 

2.  Grasp the regulator assembly with one hand and 

turn the used gas cylinder counter-clockwise 

until is comes loose.

3.  Slide the power switch down one notch to the 

SERVICE MODE position to access the main 

service menu.

4.  push WineStation Service next to any of the 

displays.

5.  push MORE. 

6.  push GLT to start the test.

7.  When the test is complete push EXIT, then slide 

the power switch up to the ON position.

8.  push up on the spout cover release lever, lower 

the spout cover and close the front door.

9.  Reattach the argon gas cylinder to the bottom of 

the gas regulator assembly (turn clockwise until 

snug, do not over-tighten).

ON

SERVICE MODE 

OFF

Spout cover 

release lever 

(on bottom of 

spout cover)

Regulator 

assembly

Argon 

gas  

cylinder

Bottle Service

WineStation Service

STBY

PWR

LOCK

Exit

More

Temp

Set

Screen

Diag.

Exit

More

GLT