Heartland 4210CDGBLK User Guide
25
Self Clean
position
position
Figure C
5. Turn the oven thermostat control knob clockwise until it
can no longer be turned (see fig c). Bake indicator will
come on.
come on.
6. Your oven is now in the self clean mode and will operate
in self clean mode for the time you have set.
7. At the end of the cycle the oven will shut off and the clock
will flash "P0.00" and the symbol "AUTO" alternately.
8. Turn the thermostat control knob to “0”. The clock will flash
until the the oven is unlocked.
9. The safety interlock is active until the oven has cooled to
a safe temperature (approximately 1 hour) You will not
be able to unlock the oven door during this cool down
period. Please do not attempt to open door while locked, or damage to locking mechanism may occur.
be able to unlock the oven door during this cool down
period. Please do not attempt to open door while locked, or damage to locking mechanism may occur.
Caution: Even after the oven door lock has released the oven may still be too hot to touch.
Use caution to avoid burns.
Use caution to avoid burns.
10. When the oven has sufficiently cooled, wipe away the remaining grey ash with a damp cloth.
DANGER:If a large amount of smoke comes out of the oven vent it is probably because you
have left something in the oven or the storage drawer. Turn off the oven thermostat control.
have left something in the oven or the storage drawer. Turn off the oven thermostat control.
Allow the oven to cool and use caution when removing any utensils or debris, to avoid burns.
Note: Self clean mode may be cancelled at any time... by turning the oven thermostat control
back to "0". Unlatch the self clean door latch.
back to "0". Unlatch the self clean door latch.
Remember, the safety interlock is active until the oven has cooled to a safe temperature - do
not attempt to force open.
not attempt to force open.
Time Delay Self Clean
To set TIME DELAY self clean
1. Lock the oven door by pushing the self clean door latch fully to the right. (see fig. B)
2. The clock will display "P1.30" which indicates one hour thirty minutes of self clean time. As well "
"
and "AUTO" symbol will light up, indicating the self clean cycle is active.
3. Press bake "
" button on the clock
4. Tap the
"
"
button for additional self clean time in one minute increments. Press and hold to advance
quickly to 3:00 hour maximum. 3 hours is recommended for maximum cleaning.
5. Next, press the "
STOP
" end time button, the display will change to show the time of day.