Heartland 4210CDGBLK User Guide

6.  Use the "

" or "

"  to set the actual time of the day you want the oven to shut

off. After 5 seconds the display will change to show self clean time remaining, the

"AUTO"  indicator will remain lit, and the " 

 " symbol will shut off showing the oven

is not in operation and delay timer is active.

7.  Turn the oven thermostat control knob, to the self clean position. (see fig C,
previous page)

8. Your oven is now in the delay self clean mode and will operate for the time you have
set.

9. When the self clean cycle begins, the "

 " symbol will light up showing that the

oven is in operation and will be in the self clean cycle for the length of time on the
display.

10.  At the end of the cycle the oven will shut off and the clock will flash "P0.00" and the
symbol "AUTO" alternately.

11.Turn the thermostat control knob to “0”. The clock will flash until the the oven is
unlocked.

12. The safety interlock is active until the oven has cooled  (approximately 1 hour) You
will not be able to unlock the oven door during this cool down period. Please do not
attempt to open door while locked or damage to the locking mechanism may occur.

Caution: Even after the oven door lock has released the oven may still be too hot to
touch. Use caution to avoid burns.

13. When the oven has sufficiently cooled wipe away the remaining grey ash with a
damp cloth.

DANGER: if a large amount of smoke comes out of the oven vent it is probably
because you have left something in the oven or the storage drawer.  Turn off the oven
thermostat control.  Allow the oven to cool and use caution when removing any utensils
or debris, to avoid burns.

Turn the oven thermostat control knob, to the "0" position.