GE CSB9120SJSS Installation Instruction

NOTE: Additional clearances between the cutouts 

may be required. Check to be sure the oven supports 

above the Warming Drawer location do not obstruct 

the required interior depth and height. See Warming 

Drawer installation instructions for details.

30s

23-1/2s

25-1/4s

17-1/2s

2

s

 Min. 

(3

s

 Recommended)

Per Warming 

Drawer 

Requirement

Construct 

Solid Bottom 

Min. 3/8s 

Plywood 

Supported 

by 2 x 4 or 2 x 

2 Runners all 

Four Sides

The Advantium 120V can be installed in 

combination with other GE/Monogram appliances. 

Always follow each product’s Installation 

Instructions to complete the installation.

Order a 30s wide single oven cabinet or cut the 

opening in a wall to the dimensions shown.

•  Allow 2-1/8s case trim overlap on the sides, 

1-1/16s overlap on the top and 7/8s overlap 

on the bottom of the opening for all models.  

•  Oven overlaps will conceal cut edges on all sides 

of the opening.

When installed over a single oven or a warming 

drawer, allow at least 2s between the two 

openings. This separation will provide clearance 

for bottom overlap of the Advantium 120V and the 

other appliance overlaps.
Construct a solid oven floor of 3/8s min. thick plywood 

supported by 2 x 4  or 2 x 2 runners on all sides.
•  The support must be level and rigidly mounted, 

flush with the bottom edge of the cutout.

30s

23-1/2s

25-1/4s

17-1/2s

Construct 

Base 

Min. 3/8s 

Plywood 

Supported 

by 2 x 4 or 

2 x 2 Runners 

all Four Sides