Whirlpool G7CG3064X Owner's Manual

NOTE: Burner ratings listed below are for Natural gas.

IMPORTANT: Your cooktop is factory-set for use with Natural 
Gas. If you wish to use LP Gas, an LP Gas Conversion Kit is 
included with your new cooktop. See the instructions included 
with the LP Gas Conversion Kit for details on making this 
conversion.

Electric igniters automatically light the surface burners when 
control knobs are turned on.

The large burners (17,000 Btu/h [British Thermal Units], 
15,000 Btu/h and 12,500 Btu/h) provide the highest heat setting, 
and are ideal for cooking large quantities of food or liquid, using 
large pots and pans. The small burners (9,200 Btu/h, 9,000 Btu/h 
and 5,000 Btu/h) allow more accurate simmer control at the 
lowest setting, and are ideal for cooking smaller quantities of 
food, using smaller pots and pans.

Before setting a control knob, place filled cookware on the grate. 
Do not operate a burner while using empty cookware or without 
any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does 
not ignite, listen for a clicking sound. If you do not hear the igniter 
click, turn off the burner. Check for a tripped circuit breaker or 
blown household fuse.

Proper grounding and polarity are necessary for correct operation 
of the electric ignition system. If the wall receptacle does not 
provide correct polarity, the igniters will become grounded and 
occasionally click, even after the burner has ignited. Contact a 
trained repair specialist to check the wall receptacle to see 
whether it is wired with the correct polarity.

A

B

C

D

A

B

C

D

E