Lynx L27PSFR3 Owner's Manual

20

First, confirm that the grill is 

getting electricity by turning 

on the lights, then:
  

 

► checK the igniteRs 

your lynx grill uses an electric 

ignition system that does not 

spark.  instead, the igniters 

should glow constantly when 

a control knob is pushed in. 

 

…

ensure that all burner 

controls are set to off. 

 

…

Remove the cooking 

grates and briquette trays.  

 

…

watch an igniter as you 

push in and hold the cor-

responding control knob.  

you will need either a 

small mirror or shiny metal 

object to see the igniter 

under its cover.  

(Be sure you push in the 

correct control knob and 

keep the knob in the 

“off” position)  

 

…

check the remaining 

igniters.  if igniters don’t 

glow, proceed with trou-

bleshooting or match-

light the burner. 

 

► checK the BuRneRs

if the igniters are working 

check to see if gas is 

reaching the burners by at-

tempting to match light a 

burner. 
Be caReful! if the 

BuRneR fails to ignite, 

wait 5 minutes BefoRe 

attempting to ignite 

otheR BuRneRs! 

(see 

indeX: “match lighting” for 

further details.)

if you smell gas while 

the gRill is opeRating, 

immediately tuRn off all 

BuRneRs and shut off 

the main fuel supply. 

 

► peRfoRm a leaK test 

(see indeX: “leak test” for 

further details.)

 

► checK foR BlocKages 

(see indeX: “clean the Brass 

Burner” for further details.)

if match lighting doesn’t work, 

re-check fuel connections for 

leaks and ensure the supply 

is of the correct type and is of 

adequate pressure.

 (see indeX: 

“leak test” for further details.)

 

if the burner will light with a 

match, then the igniter may 

not be functioning correctly. 

call for service. 
if the burner will not match 

light, and you know you are 

getting gas, wait for any 

gas to dissipate and remove 

the burner and check it for 

blockages. 

(see indeX: “clean 

the Brass Burner” for further details.)

gas collector hood

hot

surface

igniter