Gaggenau AL400721 Brochure
158
Cooktops
C G 280 110F
Stainless steel
Width 80 cm
Liquid gas 28 – 37 mbar
Width 80 cm
Liquid gas 28 – 37 mbar
C G 280 210
Stainless steel
Width 80 cm
Natural gas 20 mbar
Nozzles for liquid gas 50 mbar included
Width 80 cm
Natural gas 20 mbar
Nozzles for liquid gas 50 mbar included
Included in the price
1 wok attachment ring
Necessary installation accessories
C A 280 410
C A 280 410
Built-in frame (to be welded in)
Special accessories
W P 400 001
W P 400 001
Wok pan made of multiple-layer
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
Gas cooktop
C G 280
– For flush installation
– 80 cm wide appliance suitable for
60 cm deep worktops
– 12.1 kW on 5 burners
Cooking zones
CG 280 110F
1 two-ring wok burner (230 – 4,600 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (600 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
1 two-ring wok burner (230 – 4,600 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (600 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
CG 280 210
Preset for natural gas 20 mbar
1 two-ring wok burner (230 – 5,000 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (500 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(350 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(350 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
Preset for natural gas 20 mbar
1 two-ring wok burner (230 – 5,000 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (500 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(350 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(350 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
For bottled gas 50 mbar
(nozzles included)
1 two-ring wok burner (230 – 4,600 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (600 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
(nozzles included)
1 two-ring wok burner (230 – 4,600 W),
suitable for pots up to max. ø 28 cm.
1 high output burner (600 – 3,000 W),
suitable for pots up to max. ø 24 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
max. ø 22 cm.
1 standard output burner
(410 – 1,750 W), suitable for pots up to
ø 18 cm.
1 economy burner (330 – 1,000 W),
suitable for pots up to max. ø 18 cm.
Handling
Control knobs with cooking zone and
output level markings.
One-handed operation.
output level markings.
One-handed operation.
Features
Three-part cast pan support with
continuous pot surface.
Enamelled burner cover.
continuous pot surface.
Enamelled burner cover.
Safety
Thermoelectric safety pilot.
Planning notes
Built-in frame CA 280 410 as required
installation accessory.
Can be welded into stainless steel
worktop.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Air intake from above.
No intermediate shelf required.
Appliance must be fixed from
underneath.
Access from above.
Rear panel and wall trims must be heat-
resistant and consist of a non-
flammable material.
installation accessory.
Can be welded into stainless steel
worktop.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Air intake from above.
No intermediate shelf required.
Appliance must be fixed from
underneath.
Access from above.
Rear panel and wall trims must be heat-
resistant and consist of a non-
flammable material.
A minimum clearance of at least
150 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 30 – 50 mm.
With a total connected load of more
than 12 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
150 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 30 – 50 mm.
With a total connected load of more
than 12 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
Special accessories
(order as spare parts):
Part No. 648786 Simmer plate
Part No. 088903 Espresso cross
(order as spare parts):
Part No. 648786 Simmer plate
Part No. 088903 Espresso cross
Appliance weight: approx. 19 kg.
Connection
Total connected load gas
12.1/12.5 kW .
Connecting cable 1.4 m with plug.
12.1/12.5 kW .
Connecting cable 1.4 m with plug.