Bose® WAVEMSIVPS Owner's Manual

The system has a touch-sensitive control pad on the top panel.
Momentarily placing your hand on the touch pad can power on or 

off the system, snooze a sounding alarm, and reset it for the next 

day (see page 11).

Notes:
•  Press-and-hold operations require holding the button down for 

about one second.

•  Pressing 

, 

, or 

 automatically powers on the system to

the selected source.

Source indicators: CD, FM, AM, or AUX 

Play mode

Clock

Alarm status

Source or system-related information

•  Press 

 on the remote control 

or

•  Touch the touch pad.

 

The last source you were listening to is active.

Alternatively: 
Press any source button to power 

  

the system on to that source.  

Notes:
•  Selecting 

AUX does not power on a device connected to AUX IN 

(such as a media player). Power on the device first.

•  After 24 hours of no button presses, the system switches to 

standby (off). If the 20-minute system standby timer (page 14) 

is enabled, the system switches to standby if no audio is played 

and no buttons are pressed for 20 minutes.

Press and hold

or

to adjust the volume level.

VOLUME - 0 (silent) to 99 (loud) appears on the display to 

indicate the level.

Press to mute the system. 
Press again, or press

to unmute. 

While muted, you can press

to lower the volume before  

unmuting the system.
Note:  When the system is off, the volume can only be adjusted 

between 10 and 75.

Press 

SLEEP to set the system to shut off after a selected 

period of time.

•  After pressing 

SLEEP, SLEEP - 30 MIN (or your last setting) 

 appears on the display and the sleep timer begins counting 

down. If the system is off, press 

SLEEP to power on and  

immediately set the sleep time. The last source selected will  

start playing as the sleep timer counts down.

•  While the 

SLEEP setting is displayed, press SLEEP again to  

set the sleep timer to 10-90 minutes (in 10-minute increments)  

or OFF. 
Note:  If more than 10 seconds elapses between button  

presses, the system automatically exits the sleep timer 

setup mode.

•  To review the remaining sleep time, press 

SLEEP.

•  To cancel the sleep timer, press and release 

SLEEP until  

SLEEP - OFF appears on the display.

Using the System