Siemens C79000 Z7076 C638 04 User Manual

6-5

SIMATIC Box PC 620   Operating Manual
C79000-Z7076-C638-04

Set the clock time and the date in the setup menu.

Press <F2> to call setup when booting the computer.

The battery is dead if the clock time and the date are still incorrect after you switch
off your PC and switch it back on again. In this case, please contact your technical
support team (Chapter 8).

The following table describes the error messages that the BIOS system outputs.
Error messages the operating system or program outputs are described in the
manuals for these programs.

Press <F2> to call Setup when booting the computer.

Address conflict

Plug and Play Problem
Contact your technical support team.

Combination not supported

Plug and Play Problem
Contact your technical support team

IO device IRQ conflict

Plug and Play Problem
Contact your technical support team

Invalid System Configuration
Data

Plug and Play Problem
Please set the option RESET CONFIGURATION.DATA in the
Advanced Setup menu.
Contact your technical support team

Allocation Error for ...

Plug and Play Problem
Please undo the last hardware change.
Contact your technical support team

System battery is dead
Replace and run SETUP

The battery on the CPU module is defective or dead.
Contact your technical support team

System CMOS checksum bad
Run SETUP

Call up SETUP, adjust settings and save. If this message appears
during each power up, contact your technical support team.

Incorrect Drive A type
Run SETUP

Check the SETUP entries for drive A.