Siemens C79000 Z7076 C638 04 User Manual

6-11

SIMATIC Box PC 620   Operating Manual
C79000-Z7076-C638-04

After installing a new hard disk it is necessary to create partitions with the program
“FDisk”  when the partitions have errors or need to be changed.

By deleting or creating partitions or logical DOS-hard drives all saved data is lost
on the hard disk. All drives on the hard disk will be erased.

The hard disk is delivered with the following installed:

– a partition of  Typ PRI DOS, System FAT 16,

– a apartition of Typ EXT DOS, System FAT 32.

To restore the partitions to their original condition, please do the following:

1. To boot from the Recovery CD proceed as follows: When the message 

Press <F2> to enter Setup

appears on the screen press the ESC key. After intialization a boot menu to
select the boot options is displayed.

2. Select “4. ATAPI CD-ROM Drive”.

3. When “Microsoft Windows 98-Startup Menu” is displayed, select 

“2. Start Windows 98 Setup from CD ROM”.

4. In the “Microsoft Windows 98-Start Menu” select

“2. Start Windows 98 Setup from CD ROM”.

5. Start the Microsoft Windows 98 hard disk configuration program with

”A:\>FDisk” .
Select the dialog box for enable large disk support  (Y/N)...? [ N ] ” for No.

6. Create a primary DOS-Partition of 2045 MB for a FAT 16 file system. Answer

the question “Do you wish to use the maximum available size...” for a 2045 MB
FAT16 partition with [Y] for Yes.

7. In order to continue with the next step “Create a Save to Disk Partition” the pri-

mary partition needs to be formatted.
Use the Recovery CD to boot as described in steps 1 to 3 above and then for-
mat drive C: with the program “Format”.
Type: ”A:\>Format C:”.