Hearth & Home Technologies be-36-c User Manual

Hearth & Home Technologies   •  BE-36-C, BE-36-CIPI  •  397-981 Rev. V  1/07

26

The diagram shows how to properly position, level, and 
secure the appliance (see Figure 7.11). Nailing tabs are pro-
vided to secure the appliance to the framing members.
•  Rear venting - refer to Vent Clearances and Framing 

(Section 6B) for hole location.

•  Place the appliance into position. 
•  Level the appliance from side to side and front to 

back.

•  Shim the appliance, as necessary. It is acceptable to 

use wood shims.

•  Bend out nailing tabs on each side.
•  Keep nailing tabs fl ush with the framing.
•  Secure the appliance to the framing  by using nails or 

screws through the nailing tabs.

NOTE: Once appliance is setup for top or rear venting, 
it CANNOT be changed at a later time.

Fire Risk.
•  Prevent contact with sagging, loose insulation.

•  Do NOT install against combustible materials 

such as exposed insulation, plastic and insulation 
backer.

Fire Risk.
•  ALWAYS maintain specifi ed 
  clearances around the appliance.
•  Do NOT notch into the framing around the appliance spacers.
Failure to keep insulation, framing or other material away from 
the appliance may cause fi re.