Hearth & Home Technologies be-36-c User Manual

41

Hearth & Home Technologies   •  BE-36-C, BE-36-CIPI  •  397-981 Rev. V  1/07

Remove shipping materials from inside or underneath the 
fi rebox.

Clean/vacuum any sawdust that may have accumulated 
inside the fi rebox or underneath in the control cavity.

Install approved accessories per instructions included with 
accessories. See Service Parts List for appropriate acces-
sories. Refer to Section 16.

Placing the Ember Material
Ember material is shipped with this gas appliance. To place 

the ember material:•  Embers CANNOT be placed di-
rectly over ports. Care should be taken not to cover the 
lighting trail of ports (from back to front). 

•  When placing Glowing Embers

®

 

onto the burner care 

should be taken so that the ports are not covered. Place 
the dime-size ember pieces near the port holes in the 
burner top (see Figure 12.1). Failure to follow this pro-
cedure will likely cause lighting and sooting problems.

•  Place lava rock on base pan on both sides of the burner. 

Do NOT place on burner top. 

•  Save the remaining ember materials for use during appli-

ance servicing. The embers provided should be enough 
for 3 to 5 applications.

Explosion Risk.

•  Follow ember placement instructions in 

manual.

•  Do NOT place embers directly over 

burner ports.

•  Replace ember material annually.

Improperly placed embers interferes with proper burner 
operation.

Shock or fi re risk.
Use ONLY optional accessories approved for 
this appliance.

•  Using non-listed accessories voids warranty.
•  Using non-listed accessories may result in a 

safety hazard.

•  Only Hearth & Home Technologies approved 

accessories may be used safely.