Viking FWCI1240 User Manual
9
8
Using the Unit
Loading Product
IMPORTANT: Before storing perishables, allow unit to run for a
minimum of 24 hours to allow temperature stabilization after
start-up.
minimum of 24 hours to allow temperature stabilization after
start-up.
When loading items into unit, do no block internal louvers and
fan guard openings or performance will be decreased.
fan guard openings or performance will be decreased.
Shelving
IMPORTANT: To achieve maximum performance, interior louver
openings and fan guard openings should never be obstructed.
openings and fan guard openings should never be obstructed.
All Refrigerator
The single door unit comes standard with two adjustable, full
extension, pullout shelves. Shelving positions are adjustable.
extension, pullout shelves. Shelving positions are adjustable.
Wine Center
The single door unit comes standard with five full extension
black vinyl coated wine racks capable of storing 20 total wine
bottles (15” models) or 40 total wine bottles (24” models).
Shelves are removable and adjustable to accommodate
oversized (magnum) bottles.
black vinyl coated wine racks capable of storing 20 total wine
bottles (15” models) or 40 total wine bottles (24” models).
Shelves are removable and adjustable to accommodate
oversized (magnum) bottles.
Beverage Center
The single door unit comes standard with two full extension
black vinyl coated wine racks and one full extension pullout
shelf allowing for storage of both wine and beverages. Shelving
positions are adjustable.
black vinyl coated wine racks and one full extension pullout
shelf allowing for storage of both wine and beverages. Shelving
positions are adjustable.
Adjusting Full Extension Shelving
1. Pull the shelf out to its farthest position. Locate the tabs in
the middle of both extenders. Press left tab up and right tab
down and pull shelf out.
the middle of both extenders. Press left tab up and right tab
down and pull shelf out.
2. Reposition each bracket separately. Grasp the middle of the
bracket, pull the front end up and out, then forward to remove.
bracket, pull the front end up and out, then forward to remove.
3. Place bracket at the desired position. Push the rear hook into
the rear key slot. Set front of bracket on the wall hook.
the rear key slot. Set front of bracket on the wall hook.
4. Repeat for other bracket(s).
5. Push extenders completely into the unit. Align the shelf
grooves with the extenders and slide completely into the unit.
grooves with the extenders and slide completely into the unit.
Press tabs and
pull out shelf
pull out shelf
Using the Unit
To remove
brackets,
remove shelf,
lift front of
bracket to
disengage the
front key slot,
and pull
forward to
disengage the
rear key slot.
Removing drawers from Refrigerated Drawer Unit
Full-extension Drawers – Pull the drawer out to its farthest
point. Locate the tabs in the middle on both sides of the
extenders. Press left tab up and right tab down; pull drawer
out. To return drawer, first push both extenders completely in
then line up the shelf grooves and slide easily into the unit.
point. Locate the tabs in the middle on both sides of the
extenders. Press left tab up and right tab down; pull drawer
out. To return drawer, first push both extenders completely in
then line up the shelf grooves and slide easily into the unit.
CAUTION
Completely empty the drawer before removing.