Smeg SC08MFX User Manual

When the oven is used for the first time, or after an interruption in the
electricity supply, the display flashes at regular intervals.

Press 

 for 1 / 2 seconds to stop the display flashing and start the

procedure for setting the correct time. Press the value modification keys

 or 

 to increase or decrease the setting by one minute for each

pressure.
Press one of the two value modification keys until the current time
appears. 6/7 seconds after the last key is pressed, the clock will start from
the time set.
At the end of each programmed operation 8 beeps will sound 3/4 times at
intervals of about 1 and a half minutes. This sequence can be stopped at
any time by pressing any key.

•  Press 

 and the display will light up as shown in

figure 1.

•  Within 6/7 seconds, press the 

 or 

 keys to set

the timer. Each time a key is pressed, 1 outside
segment, representing 1 minute of cooking time,
will light up or go out. (figure 2 shows a cooking
time of 10 minutes).

•  6/7 seconds after the last key is pressed, the

countdown will start; when it finishes, the buzzer
will sound.

•  During the countdown, the current time can be

viewed by pressing the 

 key once; press it again

to return to the timer display.

•  At the end of the countdown, the oven must be

1)

2)