Smeg SA301W-5 User Manual
Instructions for the user
28
8. ADDITIONAL MAINTENANCE
The oven may require additional maintenance or replacement of parts
subject to wear such as seals, bulbs, and so on. The following
instructions describe how to carry out these minor maintenance
operations.
subject to wear such as seals, bulbs, and so on. The following
instructions describe how to carry out these minor maintenance
operations.
Before any intervention, disconnect the power supply.
8.1 Replacement of light bulb
Remove the bulb protector A by turning anticlockwise and change bulb B
(in the 8-function model with front glass panel change the halogen bulb C)
with a similar one. Re-fit the bulb protector A.
with a similar one. Re-fit the bulb protector A.
Only use oven bulbs (T 300°C).
8.2 Removing the door
8.2.1
With mobile levers of type 1
With the door completely open, lift the levers A until they touch the
hinges B and take hold of the two sides of the door with both hands
close to the hinges. Raise the door to an angle of about 45° and remove
it. If the hinges have not locked, repeat the operation, raising the levers
A and keeping the door slightly raised. To reassemble, fit the hinges B
into their grooves, then lower the door into place, ensuring that it remains
fitted into the grooves C, then lower the levers A.
hinges B and take hold of the two sides of the door with both hands
close to the hinges. Raise the door to an angle of about 45° and remove
it. If the hinges have not locked, repeat the operation, raising the levers
A and keeping the door slightly raised. To reassemble, fit the hinges B
into their grooves, then lower the door into place, ensuring that it remains
fitted into the grooves C, then lower the levers A.