Smeg SCP111NE1 User Manual

Semiautomatic cooking is the function which allows a cooking operation to
be started and then ended after a specific length of time set by the user.

Select a function (see paragraph “7.6 Selecting a function”) and press PT1
twice. The display will show the 

 figures and the 

 symbol

(flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59). A few seconds after the required duration is set, the 

 symbol will

stop flashing, and semiautomatic cooking will start from that moment. At
the end, the word STOP will appear on DSP1, cooking will stop and a
buzzer will sound; press PT1 to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will
restart normal operation with the cooking settings selected previously. PT2 has to
be pressed to switch the oven off completely.

Modifying the data set
Once semiautomatic cooking has started, its duration can be changed.
When the 

 symbol is steady and cooking is in progress, press PT1

once. The 

 symbol starts flashing and PT1 can be turned to change the

set duration. A few seconds after the last change, the 

 symbol will stop

flashing, and semiautomatic cooking will restart from the new value.
To change the preset temperature, wait for the 

 symbol to become

steady and turn PT1 to the right or left to increase or decrease the cooking
temperature.