Smeg SCP111NE1 User Manual

Automatic cooking is the function which allows a cooking operation to be started at
a set time and then ended after a specific length of time set by the user.

Select a cooking function, set the cooking temperature required or leave
the preset temperature (see paragraph “7.6 Selecting a function”) and

press PT1 twice. The display will show the 

 figures and the 

symbol (flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59).

For safety reasons, when setting automatic cooking the user must first
program a cooking duration and then set the cooking start time. It is not
possible to set the cooking start time only, without setting the cooking
duration.

After setting the duration, press PT1 once.

The 

 symbol and the current time will appear on the display.

Turning PT1 to the right increases the time, allowing the cooking start
time required to be set.

A few seconds after the required duration is set, the 

 and 

 symbols

will stop flashing, and the oven will start to wait for the starting time set. At
the end, the word STOP will appear on DSP1, cooking will stop and a
buzzer will sound; press PT1 once to deactivate it.