Smeg S2010MFB1 User Manual

 
 
 

 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

27 

 

WE ADVISE YOU READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE 
USING THE OVEN. 
THIS APPLIANCE HAS BEEN DESIGNED FOR THE FOLLOWING PURPOSES: 
 

- COOKING AND HEATING FOOD -

 
ANY OTHER USE IS TO BE CONSIDERED IMPROPER. 
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE. 

 

 

NEVER TRY TO REPAIR THE APPLIANCE BY YOURSELF! 
IN CASE OF ONGOING FAULTS, TURN THE MAIN SWITCH OFF, DISCONNECT 
THE POWER SUPPLY AND CONTACT YOUR NEAREST DEALER. 
ALWAYS INSIST ON ORIGINAL SPARE PARTS. 

 

 

THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INJURIES 
TO PERSONS OR DAMAGE TO THINGS CAUSED BY FAILURE TO FOLLOW THE 
ABOVE INSTRUCTIONS OR BY TAMPERING WITH ANY APPLIANCE 
COMPONENTS. 

 

 

THE IDENTIFICATION PLATE, WITH TECHNICAL DETAILS, THE SERIAL NUMBER 

AND 

 MARK ARE LOCATED ON THE OVEN DOOR FRAME. 

DO NOT REMOVE THE PLATE.

 

 

NEVER LEAVE PACKAGING AROUND THE HOME. 

 

 

 

THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND SHOULD 
THEREFORE BE KEPT INTACT IN A SAFE PLACE FOR THE ENTIRE LIFE CYCLE 
OF THE OVEN. 
INSTALLATION MUST BE DONE BY QUALIFIED PERSONNEL IN ACCORDANCE 
WITH CURRENT REGULATIONS. 
THIS APPLIANCE CONFORMS TO ALL CURRENT LEGAL PROVISIONS 
CONCERNING RADIO DISTURBANCES. 

 

 

EARTHING THE APPLIANCE IN COMPLIANCE WITH WIRING SYSTEM SAFETY 
REGULATIONS IS MANDATORY. 

 

 

THE PLUG TO BE CONNECTED TO THE POWER CABLE AND RELEVANT 
SOCKET MUST BE OF THE SAME TYPE AND CONFORM WITH REGULATIONS IN 
FORCE. 

 

 

NEVER DISCONNECT THE PLUG BY JERKING THE CABLE. 
 

 

 

DO NOT OBSTRUCT OPENINGS OR AIR AND HEATING VENTS. 

 

 

AFTER USING THE OVEN, ALWAYS MAKE SURE THE CONTROL KNOBS ARE AT 
"ZERO" POSITION (OFF). 

 

 

PARTS OF THE APPLIANCE MAY BE HOT DURING OR IMMEDIATELY AFTER USE.
CARE SHOULD BE TAKEN TO AVOID TOUCHING HEATING ELEMENTS INSIDE 
THE OVEN. ALLOW SUFFICIENT TIME FOR THE APPLIANCE TO COOL AFTER
SWITCHING OFF.