Lucent Technologies merlin messaging system User Manual

The MERLIN Messaging System module faceplate contains:

One system status LED

●   

One LED for each of the voice ports

●   

The color(s) and status (that is, on, off or blinking) of the LEDs provide information regarding the
operation of the MERLIN Messaging System module.

The following table provides a description of the port-level and system status LED display
variations.

Port not available for use (off)

Port in service and idle (on-hook)

Port in use (off-hook)

System is not powered up or there is a fault condition

System is in a ready state (off-hook; speaking or recording; receiving Touch Tones)

There is a self-test failure or system is out-of-service

There is a self-test failure or system is out-of-service

System software is being upgraded

Hard disk is active

System LEDs (Installation)

http://www.sostc.com/lucent/installation/overview/mmgencfg4.htm [2/2/2000 2:32:09 PM]