Lucent Technologies merlin messaging system User Manual
Programming System Language Mode and System Language
The System Language is the language callers hear. It can be set to one of four languages: U.S.
English, Latin American Spanish, Canadian French, or Portuguese Spanish (Release 2 or later). The
System Language Mode can be set to Monolingual or Bilingual. When the System Language Mode
is set to Monolingual, callers hear system prompts in one of the four languages (the language that is
programmed as the System Language). When the System Language Mode is set to Bilingual, callers
hear system prompts in two of the four languages. The first language the caller hears is the Primary
English, Latin American Spanish, Canadian French, or Portuguese Spanish (Release 2 or later). The
System Language Mode can be set to Monolingual or Bilingual. When the System Language Mode
is set to Monolingual, callers hear system prompts in one of the four languages (the language that is
programmed as the System Language). When the System Language Mode is set to Bilingual, callers
hear system prompts in two of the four languages. The first language the caller hears is the Primary
Language. The Secondary Language is the alternate language the caller can hear by pressing
.
When a system is in Bilingual mode, the user includes in their personal greeting instructions for the
caller to press
to hear system prompts in the alternate language.
Note:
The System Language Mode and System Language apply
to all Automated Attendants.
to all Automated Attendants.
●
The MERLIN Messaging System factory settings for
System Language Mode and System Language are
Monolingual and U.S. English.
System Language Mode and System Language are
Monolingual and U.S. English.
●
Refer to System Planning Form 1 – System
Parameters for the System Language Mode and System
Language that applies to your site.
Parameters for the System Language Mode and System
Language that applies to your site.
●
Setting System Language Mode
The factory-set System Language Mode for a new system is Monolingual. Use the following
procedure to change the Language Mode to Bilingual, if required.
procedure to change the Language Mode to Bilingual, if required.
To program the System Language Mode:
Step
Programming Task
Touch-Tone Input
1
2
Select System Parameters
3
Select System Language Mode
4
Select Language Mode
5
Select Bilingual
Setting System Language
The factory-set System Language for a new Monolingual system is U.S. English. If the Language
Mode has been changed to Bilingual, the default Primary Language is U.S. English and the default
Secondary Language is Latin American Spanish. Use the following procedure to:
Mode has been changed to Bilingual, the default Primary Language is U.S. English and the default
Secondary Language is Latin American Spanish. Use the following procedure to:
Change the System Language in a Monolingual system.
●
Change the inital Primary and/or Secondary Language(s) in a Bilingual system.
●
Programming System Language Mode and System Language
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm5.htm (1 of 2) [2/2/2000 2:32:32 PM]